Detailed Raspbian Buster wsprdaemon install instructions.txt

Detailed instructions for a greenfield install for the Raspberry Pi 4
(because I always forget)
Optional steps included : xrdp and cockpit

https://www.raspberrypi.com/software/operating-systems/

Raspberry Pi OS (Legacy)
A stable legacy version of Raspberry Pi OS Buster.

Compatible with:

All Raspberry Pi models
Raspberry Pi OS (Legacy) with desktop
Release date: September 22nd 2022
System: 32-bit
Kernel version: 5.10
Debian version: 10 (buster)
Size: 757MB

Raspberry Pi Imager : choose file from disk

Put a new file with name ssh in root folder of SD card so we can later ssh into the Raspberry Pi

eject card reader / disk system

Connect ethernet via cable, insert SD card, sudo power on Raspberry Pi

PuTTy ip-address (on Windows when needed <<cmd>> arp -a)

sudo raspi-config
1 S5 B4
3 P2 P3
5 L4 FR
reboot

ssh OK
vnc via VNC Viewer can not show desktop
RDP NOK

sudo apt update
sudo apt upgrade
sudo apt install cockpit
in browser <ip-address:9090>
Enable stored metrics install cockpit-pcp
sudo apt install xrdp
RDP OK

https://github.com/rrobinett/wsprdaemon/blob/master/README.md

cd ~
git clone https://github.com/rrobinett/wsprdaemon.git
cd wsprdaemon
./wsprdaemon.sh -V

I copied a previous wsprdaemon.conf; else follow the instructions in the README
I use WinSCP for this kind of filetransfers
I use Notepad++ for editing as it can be switched from the Windows CR/LF to Linux

./wsprdaemon.sh -V (should be -a but this works as well)
Requesting permission after about 1 1/2 minute of working
after 4 minutes the numpy install takes the most time (7 minutes)
Version = 3.0.6

source ~/wsprdaemon/.wd_bash_aliases
wd-rci
wd-help

And we are on after :
wda
wds

My first spot : 230217 1008 80.00  -7  0.14   14.0970103 G3ZIL          IO90   33  0    3
Amazing